Home
Prism
Topaz
How
to Buy
Pricing
Training
Instructors
Products
Prism
Supplies
General
Supplies
Sensors
SodaSorb
SodaSorb
Vendors
News
Testing
What
is a CCR?
Glossary
FAQs
Testimonials
Events
Gallery
Links
Customer
Advisory
Resellers
Pete's
Tunes!
Contact
| PRISM Spares & Supplies |  |
|
|
|
 |
|
| Galvanic Oxygen Sensor |
|
||||||
| The SMS202 is the recommended sensor for the PRISM Topaz and SM1600 closed circuit UBA's. | |||||||
|
|
RRP:US$77.63 |
||||||
|
|
|||||||
| Mouthpiece (DSV) |
|
||||||
Large diameter weighted mouthpiece assembly. Uses a quarter turn, lever-actuated movement incorporating water purge in surface mode. Removable high compliance mushroom valves and seats, with connectors onto mouthpiece and blank to rebreather ends.
|
|||||||
|
|
RRP:US$465.75 |
||||||
|
|
|||||||
| Oxygen and Diluent Supply Tanks |
|
||||||
Catalina Cylinders S19. 3000psi cylinder, 4.4" wide x 17.5" high, 6061 aluminum. Fitted with Crossflow pillar valves.
|
|||||||
|
|
|
||||||
|
|
|||||||
| PRISM Secondary Display |
|
||||||
| An analogue meter that is driven solely by the current generated from the oxygen sensors. Allows the diver to reference and verify the sensors performance at any point during the dive and pre- or post dive sequence. The display is completely potted and sealed, with no through material connections. Selection of sensors/info is by means of magnetic reed switches fitted to the potted circuit board. | |||||||
|
|
RRP:US$465.75 |
||||||
|
|
|||||||
| Calibration Pot Cartridge |
|
||||||
| This is used to calibrate the secondary display and is located inside their own sealed compartment, inside the battery compartment of the electronics head. If they do become accidentally flooded they are easily user replaceable - simply pull out and replace the cartridge. | |||||||
|
|
RRP:US$56.93 |
||||||
|
|
|||||||
| PRISM Remote Magnetic On/Off Switch |
|
||||||
| Waterproof magnetic slider switch with cable. | |||||||
|
|
RRP:US$113.85 |
||||||
|
|
|||||||
| PRISM Manual Oxygen Addition Supply Line |
|
||||||
| 39" LP supply line with restrictor installed to limit the rate of oxygen addition into the breathing loop. Important Safety Note: Never change any oxygen feeds on your PRISM system for anything other than a factory authorized and approved PRISM component. | |||||||
|
|
RRP:US$56.93 |
||||||
|
|
|||||||
| Adapter – LP QD |
|
||||||
| O2 clean |
|||||||
|
|
RRP:US$34.52 |
||||||
|
|
|||||||
| PRISM Sensor Harness |
|
||||||
| User replaceable harness assembly for plugging electronics head to individual sensors. | |||||||
|
|
RRP:US$20.70 |
||||||
|
|
|||||||
| PRISM Battery Snap/Connector |
|
||||||
| User replaceable battery snap connects standard 9v battery to primary electronics. | |||||||
|
|
RRP:US$8.80 |
||||||
|
|
|||||||
| PRISM Compression/Dust Pads |
|
||||||
| Two compression pads locate inside the scrubber and two moisture/dust pads locate in the bucket assembly. Price per each | |||||||
|
|
RRP:US$4.14 |
||||||
|
|
|||||||
| PRISM Exhaust Manifold Gasket |
|
||||||
| Sealing gasket for head to scrubber basket seal. | |||||||
|
|
RRP:US$8.28 |
||||||
|
|
|||||||
| PRISM Sealing Head O-ring |
|
||||||
| Custom urethane "D" style o-ring to seal the electronics head and scrubber bucket assembly. | |||||||
|
|
RRP:US$14.49 |
||||||
|
|
|||||||
| Steam
Machines, Inc
538 Hiwassee Road Lebanon, TN 37087-9298 Tel. 615-374-0202 Fax. 615-374-9193 |
|
HOME
|